Unfortunately, the method described is not the same as i am getting i.e. utility goes to sys which gives 2 options, all memory or all trigger settings. Press innit and this goes to trigger settings. Press exec and this takes me to 4 kits. I choose dm10 x mesh and this goes to normal 000 fusion kit etc.
And nothing has changed?
I didn't see a mention about pressing F1 to answer yes to resetting triggers.
Did the question not pop up?
Press
Utility.
Press
F4 (SYS).
Press
F2 (INIT).
Use the
cursor down button to highlight the DM10 Triggers setting.
(The part that the manual leaves out ...... you need to
use
the Value/Tempo dial to reveal, and to highlight, the 'hidden selection' for the
DM10X KIT's triggers s you can select them in the next step.)..
F4 (EXEC)
Press
F4 (EXEC).
Press
F1 to answer yes to the question about resetting the triggers.
Press
Drum Kit I don't know if it makes a difference on firmware versions and I don't have a DM10 module anymore to check.
Here is the final list for all the firmware/versions
DM10 – Firmware Updates [posted 9/22/2014]
DM10 Updater 1.00
DM10_boot_v1.00h.syx
DM10-app-v1.00s.syx
DM10_triggers_V1.00a.syx (use with real hat pedal)
DM10_triggers_V1.01b.syx (use with Alesis Pro-X hi hat)
DM10_sound_rom-V1.03.syx