Version in the DM10 Module

[Lip aka phellouin]

As you may know I'd just receive my DM10 module and would like to know if I need to update some of the firmware.
On the module I have :
TRIG OS 1.00a
SOUND ROM 1.03
SOUND OS 1.00m

in the DM 10 v.103 update there is :
BOOT 1.00e
APP 1.00l
TRIGGER 1.00a
SOUND ROM 1.03

So I know I'm good for the Trigger and the ROM but for APP and BOOT I don't know how to see this on the DM Module.

Thx for your help

[darrenw2112]

I just received my dm10 today and I also have the same versions you mentioned.  I tried to do the update starting with the boot and it failed.  Do i need an update?

[darrenw2112]

I just got it to take the update (i could not update the boot). Now I have versions:
Trig OS: V1.00a
Sound Rom: V1.03
Sound OS: V1.00I

Is this the latest?

[vaikl]

I just got it to take the update (i could not update the boot). Now I have versions:
Trig OS: V1.00a
Sound Rom: V1.03
Sound OS: V1.00I

Is this the latest?

For the Sound OS: No. It should be at least a "m" or "p" behind the 1.00.

Have you downloaded the last update from http://www.alesis.com/dm10studiokit and then in the Docs/Downloads tab? What version numbers did you had on your module before the update?

[vaikl]

And keep in mind, that the versions you already have on your module won't be updated if they are equal or newer than the ones from Alesis' website. If you want to update a specific OS part only, then you'll have to use only the equivalent file from the downloaded zip to transmit it via the updater app.