Author Topic: Connect two modules dm10 together  (Read 4633 times)

Connect two modules dm10 together
« on: October 15, 2017, 09:01:18 AM »
Hello,how i can connect two modules together?I do it midi in and midi out but i can´t change semitones.Thanks
« Last Edit: October 15, 2017, 02:59:44 PM by pedrinquito »

Re: Connect two modules dm10 together
« Reply #1 on: October 19, 2017, 12:45:32 PM »
nobody knows?

Offline rhysT

Re: Connect two modules dm10 together
« Reply #2 on: October 20, 2017, 06:42:36 AM »
Hello,how i can connect two modules together?I do it midi in and midi out but i can´t change semitones.Thanks

If you want to hear and tweak the instrument sounds in each module then try connecting the Main L/R audio outs from one to the Aux ins of the other and monitor its Main or Headphone output/s.

You can use a cable like this: https://www.ebay.com/p/Hosa-CPR201-Dual-Cable-1-4-TS-to-RCA-1m/2255472082

Re: Connect two modules dm10 together
« Reply #3 on: October 20, 2017, 03:25:34 PM »
Omg Rhyst it works.Thank you from Spain my friend :D

Offline rhysT

Re: Connect two modules dm10 together
« Reply #4 on: October 21, 2017, 06:03:26 AM »
Also here's some useful info about how to midi control a DM10 module from another one: http://www.alesisdrummer.com/index.php?topic=92.0

For a list of extra midi notes & sounds available in each DM10 kit refer to this Midi map: http://www.hellfiredrums.com/wp-content/uploads/2010/07/DM10-Midi-Note-Map.pdf
« Last Edit: October 21, 2017, 06:29:06 AM by rhysT »

Re: Connect two modules dm10 together
« Reply #5 on: October 21, 2017, 07:53:19 AM »
Thanks you RHYST :)

Re: Connect two modules dm10 together
« Reply #6 on: October 22, 2017, 06:35:12 AM »
a new question,drumsticks nylon or wood?
« Last Edit: October 22, 2017, 06:47:13 AM by pedrinquito »

Offline rhysT

Re: Connect two modules dm10 together
« Reply #7 on: October 22, 2017, 11:41:24 PM »
a new question,drumsticks nylon or wood?

Another option is fitting rubber tubing pieces on your drumstick tips to deaden the contact noise mainly from hitting the rubber pads.
« Last Edit: October 24, 2017, 04:34:48 PM by rhysT »

Re: Connect two modules dm10 together
« Reply #8 on: October 23, 2017, 11:42:32 AM »
oh is great,thanks