Author Topic: troubles with DM10  (Read 1630 times)

troubles with DM10
« on: October 16, 2018, 07:22:12 AM »
Hi all,

I'm here because I've troubles with DM10 Studio Kit making noise without being triggered.

Anybody else having similar problems?

Cheers
syp

Offline Mr.J.

Re: troubles with DM10
« Reply #1 on: October 16, 2018, 11:54:52 AM »
try unplugging each cable one at a time. If it clears up  it is a bad cable. happened to me twice.

Offline AlanK

Re: troubles with DM10
« Reply #2 on: October 16, 2018, 01:24:03 PM »
turn down sensitivity.. check xtalk.. read manual
DM10X with Addictive Drums 2, Pro X hi-hat, 4 crashes, foam cone conversion w Roland mesh heads, Laurin Drums snare and kick, Mapex P710W double kick pedal, Mapex 2 legged hi-hat, Behringer 8 channel USB mixer, Tascam 144MK AI, Samson Expedition Escape powered speakers

Offline rhysT

Re: troubles with DM10
« Reply #3 on: October 16, 2018, 05:05:45 PM »
Check out trigger settings in this DM10 setup guide (https://alesis.com/kb/article/1560) and your problem could be due to low threshold setting/s.
« Last Edit: October 16, 2018, 05:10:46 PM by rhysT »