ALESIS STRIKE AMP 12 2000-watt Powered Drum Amplifier
Give Your Drum Sound the Power it Deserves.
You’ve worked hard to perfect your style. It’s yours and yours alone. Same thing with your sound—it has to be uniquely yours.
Don’t trust your sound to an ordinary speaker. You need the Alesis Strike Amp 12 powered drumming speaker.
With 2000 watts of explosive bi-amplified power and super high-performance transducers, this speaker is designed specifically for your Alesis electronic drum kit.
It will deliver your sound with the power, detail and style that you demand.
With its handsome, refined appearance, lightweight but rugged construction and versatile user interface, the Strike Amp 12 is a snap to set up and use.
You’re not just any drummer. Don’t settle for just any speaker.
Features - 2000 watts of peak power delivers clarity, punch and more than enough headroom for any performance or practice space
- Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds with precise, full response across the entire frequency range without any artificial coloration
- (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
- XLR output to link another Strike Amp 12 or send your performance to another input device
- Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
- Contour EQ switch to control your sound
- Ground-Lift switch eliminates unwanted noise
Specifications Output Power:
2000W (peak, 1300LF + 700HF)
1000W (continuous RMS, 650LF + 350HF)
Drivers:
Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
Crossover Frequency: 2.0KHz
Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
Frequency Response: 53Hz – 20kHz (+3dB)
Frequency Range: 46Hz – 22kHz (-10dB)
Horn Coverage: 90o horizontal x 60o vertical (nominal)
Equalization: Contour switch with low- and high-frequency +3dB boost
Connectors:
(2) XLR/TRS 1/4” (6.35mm) combo inputs
(1) XLR link output
(1) IEC power cable input
Controls: Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
Protection: Electronic clip, thermal & transducer overdrive
Power:
Connection: IEC
Input: Voltage 100V , 110–120V , 220–240V ; 50/60Hz (switchable)
Fuse: 100–120V T10AL AC250V, 220–240V T5AL AC250V
Consumption: 800W
Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille
Dimensions: 23.8” x 13.9” x 13.8”
Weight: 16.3kg
ALESIS STRIKE AMP 12
ALESIS STRIKE AMP 12 User GuideIntroducing the ALESIS STRIKE AMP 12Looks similar to the
ALTO TS312