Have tried uninstalling each of them and it didn't show up again. Thoughts?
It's odd to show so many instances in device manager...then none.
After uninstalling did you restart the computer to complete the uninstall process?
Then connect the DM10.
If you have another computer/tablet etc see if connecting the DM10 has the same result.
If it shows up on another computer this will help rule out if the module developed an issue/problem.
If it doesn't show up on a different computer you may want to do a factory reset.
You could try backing up your settings if you want to save them but you may not be able to.
You have 3 options of what you want to reset or you can reset the whole module.
There are two ways to reset the DM10 for future reference I'll post both.
To fully restore the module to original factory settings, hold the EXIT and STORE buttons while powering on the module.
To reset only the kits, sequences, or trigger settings:
Press UTILITY to enter the main Utility Menu.
Press SYS (F4) to access the Accompaniment Settings.
Press INIT (F2) to access the reinitialization page.
Use CURSOR UP/DOWN to move through the following menu items:
All Kits: All of the module’s kits and their settings will return to factory default
All Sequences: All of the module’s sequences and their settings will return to factory default
All Trigger Settings: All of the module’s trigger settings will return to factory default
Highlight the option you would like to reset, then press EXEC (F4).
A window will appear asking you to confirm your choice. To confirm and reinitialize the selected settings, press YES (F1). To Cancel, press CANCEL (F2 or F2).
