Author Topic: USB audio Interface Latency  (Read 1708 times)

USB audio Interface Latency
« on: July 14, 2017, 04:22:28 AM »
Hi all,

My current setup is Alesis DM10, Ez Drummer 2 & Behringer UM2 Interface both plugged into the PC via USB then headphones out of USB audio interface. Does anyone have a similar setup that can give me some good settings as i'm getting a fair bit of delay and its unplayable.
In ez drummer 2 settings i have audio/midi settings to USB audio device, and in E drums settings- Alesis dm10. I did notice frequency options does anyone have any suggestions.

Any advice would be greatly appreciated.

https://www.music-group.com/Categories/Behringer/Computer-Audio/Audio-Interfaces/UM2/p/P0AVV

Re: USB audio Interface Latency
« Reply #1 on: July 14, 2017, 06:35:09 AM »
In EZdrummer's "settings" go to "audio/midi setup" and set the buffer size as low as possible. Start from 64 and if your PC can't handle it (if you hear clicks, pops or any distorted sounds) go up to the next buffer size.
Good luck!

Re: USB audio Interface Latency
« Reply #2 on: July 15, 2017, 05:51:38 AM »
Hi mate thanks for the settings I'll give that a go.
 8)