Instructions for Loading DM10 Soundset Data via USB

[Corvidae]

Okay... I've tried doing this on my module, as well, and I'm getting the same problem. I wonder if there's an issue in 1.00p that might cause this? I know it worked before on 1.00l and m...

Has anyone else run across this?

[vaikl]

Okay... I've tried doing this on my module, as well, and I'm getting the same problem. I wonder if there's an issue in 1.00p that might cause this? I know it worked before on 1.00l and m...

Has anyone else run across this?

The trigger setup restore *without* pressing Store worked for me after updating to 1.00p. For updating/backup purposes I use a dedicated laptop with only one USB port and nothing else connected or loaded. Maybe different port usage can lead into trouble?

[Corvidae]

Seems like it doesn't want to work on the USB connection. I plugged in my USB->MIDI adapter and it seems to work okay now.

[scupper2112]

I know this was probably posted somewhere on here but, has anybody else had the problem of down loading the update from Alesis for the DM10 module and during the "BOOT" app, while holding down the record button in goes to 49% and doesn't do anything after that??? I've held it for over 5min. and nothing! All the other apps load fine.Instructions from owners manual and down-loader itself are different!!!

[vaikl]

I know this was probably posted somewhere on here

Have you read this thread?

[scupper2112]

Yes and I didn't find anything relating to my issues in particular!!!! I thought maybe somewhere else on the forum.

[pdavidthomas]

I've gone through these instructions several times, with several laptops, computers, etc., and I keep getting a "Flash Write Error" when loading the BlueJay sound upgrade. Everything goes according to plan, until I go FILE, OPEN, select the bluejay, hold REC, then OPEN.

Anyone have any ideas?

Thanks.

[tyros]

http://eu.elektron.se/support/?connection=accessories
Hi I used this program for the sys ex stuff and it worked fine .
maybe try this instead.it worked for me and I am not that bright at this kind of thing.
you want the C6 software .sorry if I have this thread all wrong.hope this helps.

[AlanK]

Is there a chance your module is still in write-protected mode?

[riley_dunn]

No matter what file I load, the module never changes from "Load the .syx file into the updater program to install. Waiting..."
Am I missing something?

[rhysT]

No matter what file I load, the module never changes from "Load the .syx file into the updater program to install. Waiting..."
Am I missing something?

If you're trying to instal a DM10 Sound Rom file, check out this Alesis guide: http://www.alesis.com/kb/article/1558#update_instructions