So, as far as I understand this is working as intended? Usually this is not a real problem for me by now, because I barely use the transitions. Just wanted to make sure there is nothing wrong with the pedal.
If you can do all of the following...it's working properly
Open Hi-HatStrike the Hi-Hat pad without pressing the pedal.
Closed Hi-HatStrike the Hi-Hat pad with the pedal pressed completely down.
Hi-Hat Pedal (Chick)Press down the hi-hat controller?s pedal to create a foot-close sound without having to strike the hi-hat pad.
SplashPedal fully pressed and then instantly releasing it...or a sharp down/up.
You should also to be to make it "Bark" with minimal effort/practice.
You can adjust the Pedal under the Trigger menu and set the sensitivity and experiment with different curves..
Also one of the biggest complaints about the Medeli modules is they may seem quiet..
The EQ's are for
Amplitude.Under the Kit Menu are the EQ settings..raise them evenly.
Default is Flat/0.. High is +4 , so try 8-LOW..8-MID..12 for High as a starting point..this is the max balanced setting.
It will get loud so be careful if using headphones.