Hi Hat MIDI message?

[antoine]

My VST reads CC1 (ModWheel) for the HAT foot pressure levels.
Does the Alesis Trigger I/O send CC4?
If so, can one change the messaging from 4 to 1 there?
Someone here mentioned MIDIPipe?

What would be the best way (combination) w/ a Pro Tools HD
& the Alesis Real Pedal/TriggerI/O combo for the VST?

[ghostman]

Mac or Windows?
What VST?

I use Steven Slate Drums on a Mac.  I used MIDIPipe to re-route the CC4 signal from the IO.  the signal has to be inverted, too.

on windows try: MIDI-OX and MIDI-Yoke

[rockdude]

You could reverse the cc-data and change to CC1 in eTrigger.

[HSPTiger]

I'm not familiar with eTrigger, but a bit of googling led me to etrigger.net, which has a $79 download. Is this what you're referring to? I'm interested b/c I'm attempting to get HH control working with SSD on a PC. I tried the MidiYoke/eDrum monitor trick, which worked, but eDrum monitor slows my system down after about 2 minutes of use. Is there a "lite" version of eTrigger or anything (that won't expire after the trial period is over)?

[audiopat]

If you google for 'edrum monitor' you should find the old, free version of etrigger. I used it for a while, it runs very light, and will do what you need.