Laboratory > Do-It-Yourself or DIY

Alesis DM10, DM8 Velocity Switch Zone Triggering

(1/3) > >>

Hellfire:
Alesis DM10, Pearl REDbox Velocity Switch Zone Triggering

Unfortunately, the Alesis DM10, DM8 and Pearl REDbox can not have velocity on a switch zone of a piezo/switch dual zone trigger pad. This video shows that it is possible to use a piezo/switch trigger and have velocity on the switch zone. You will need to make your own trigger to make this work. It is important to note that piezo/piezo trigger must be selected in the trigger settings for this to work. Off the shelf piezo/switch triggers will not function in this way.

I will be posting this info over at www.Hellfiredrums.com as well.

Youtube video: Alesis DM10, Pearl REDbox Velocity Switch Triggering

See attached picture for hook-up information.

jeremiasb:
I have an Alesis Trigger IO. Can it be done to this module as well?

Hellfire:

--- Quote from: jeremiasb on October 10, 2011, 01:48:13 PM ---I have an Alesis Trigger IO. Can it be done to this module as well?

--- End quote ---
I haven't done any testing with the Trigger I/O yet, but I don't see why it can't be on the Trigger I/O.

jeremiasb:
Thanks, Hellfire. I'm gonna check it soon, then I'll post any results.

Hellfire:

--- Quote from: Hellfire on October 10, 2011, 02:11:45 PM ---
--- Quote from: jeremiasb on October 10, 2011, 01:48:13 PM ---I have an Alesis Trigger IO. Can it be done to this module as well?

--- End quote ---
I haven't done any testing with the Trigger I/O yet, but I don't see why it can't be on the Trigger I/O.

--- End quote ---
Yep, This works on the Trigger I/O as well.

Navigation

[0] Message Index

[#] Next page