Author Topic: Alesis Strike module programing  (Read 1666 times)

Alesis Strike module programing
« on: May 15, 2024, 02:54:52 PM »
My church wants the Kick separate from the rest of the kit. Can I pan it right and the rest of the kit left? Where and how. It is a new kit

Offline Chaser

Re: Alesis Strike module programing
« Reply #1 on: May 15, 2024, 03:30:23 PM »
My church wants the Kick separate from the rest of the kit. Can I pan it right and the rest of the kit left? Where and how. It is a new kit

Welcome to the Forum !

You can do it that way if you want to...I don't recommend it.
The Kit/Preset will not sound the same with everything panned and you'll more than likely have to adjust/remix FX and everything else and spend a lot of time with not particularly good sounding results.

The Alternative is to use the Direct Out for just the Kick..run it wherever you need to and set the Kick Slider on the Module all the way down.
The Kick will be OFF at the main Outs and the rest of the Kit will still sound the same/Normal and have FX etc etc..except the Kick...The Direct Outs don't/won't have FX applied.You will still have control over the level and Filters under the VOICE settings..just No FX...and No Physical Slider.
I would experiment with that before panning everything..