Author Topic: Alesis Amp 12  (Read 2056 times)

Alesis Amp 12
« on: January 19, 2024, 08:09:56 PM »
Hi,

Alesis Amp 12: I have a single line from my mixer going into VOLUME 1 on the back. I have it turned up 1/3, and the other volume control is at 0.

What are the 2 buttons for ?....do I need either of them turned on ?...will they mess up the sound if on ?

Thanks,

Bervis

Offline Chaser

Re: Alesis Amp 12
« Reply #1 on: January 19, 2024, 08:41:47 PM »
Hi,

Alesis Amp 12: I have a single line from my mixer going into VOLUME 1 on the back. I have it turned up 1/3, and the other volume control is at 0.

What are the 2 buttons for ?....do I need either of them turned on ?...will they mess up the sound if on ?

Thanks,

Bervis

If you are referring to the 2 Buttons upper Right on the back panel..they are Contour and Ground..

9. Contour: Engage (depress) this button to emphasize low and high frequencies by +3 dB.
Disengage (raise) the switch for a flatter response for live performance or for maximum output.

10. Ground Switch: Engage (depress) this switch to reduce hum or noise.

See the Manual.

EDIT:
Attached Link

STRIKE AMP 12 USER GUIDE
« Last Edit: January 19, 2024, 08:51:57 PM by Chaser »