Author Topic: 12“ Mesh Head Conversion / only with foam / step by step / incl. videos  (Read 98019 times)

Offline Gerdy

Hello e-drum colleagues,

I am Gerdy and writing from Germany.
Please excuse my English and used terms I could not get translated.

Today I would like to show you a mesh head conversion to the 12” pad coming with the X-kit.

Bottom 12" pad from Alesis DM10 X kit:




12" pads from "Pro kits" are like the regular 8" and 10" pads and can be converted via Hellfire's mesh head conversion.


This conversion
a.) is easily done, not expensive and uses the given pad space inside
b.) does not need any soldering
c.) provides a perfect and realistic playability including rolls, ghost notes etc. over the full distance of the drum sound
d.) allowes a trigger setup you are dreaming off
e.) reduces the noise (like the Hellfire conversion with the 8” and 10” pads)

The trigger settings I’m using after the conversion:
Head:
Sensitivity: 27
ReTrigger: 05
Threshold: 08
Curve: Linear
Rim:
Sensitivity: 15
ZoneXtalk: 05
Curve: Log2

Structure
I.) Past history
II.) Materials: What do I need and how long does it take
III.) Step by step instruction
IV.) Answered questions you might ask
V.) 2 videos with noise comparison and the result plus performance of the pad you get


I.) Past history

This conversion took me one month since I received the X-kit.
I tried several methods of the conversion using different materials and any kinds of foam I orderd from the internet and foam pieces bought from a clothing store. The most problem was the triggering of the rim piezo while playing on the drum head. Finally I found a very easy method which was better than I even expected.


II.) Materials

1.) What foam do I need ?
Adam Hall Hardware 019505 - Speaker Front Foam black
Link: http://www.adamhall.com/en/ah_Hardware_019505_-_Speaker_Front_Foam_black_5_mm.html
The foam comes as a roll of 2m x 1m / 78.7 Inch x 39.3 Inch.
Thickness is 5mm / 0.2 Inch.
Price: about 26 Euro / 37 USD

The foam is very thin and fluffy, but it provides exactly the stability we need, believe me.

2.) What else do I need ?
A scissors, a white sharpie / marker, a CD and of course the mesh heads.

3.) How long does it take ?
20 minutes per pad.
During the instruction you can see how you can speed up the process by preparing all pads you want to convert.


III.) Step by step instruction

1.) Opening the 12” pad:

Open the 12” pad and remove the rim with the mylar head.
Afterwards remove the 12” plastic shell.
We are using the 12” plastic shell in the next step.
That way we can speed up the process by opening all pads and afterwards putting them beside.


2.) Preparing the foam:
Lay out the foam roll, take the 12” plastic shell and the white sharpie / marker and draft 3 circles of 12” on the foam. Afterwards take the CD and draft 2 smaller circles in 2 of the 12” circles.



Every pad needs 3 foam slices: 1 closed foam slice and 2 foam slices with a CD hole.
We can speed up the process by rolling out the foam and drafting all circles on it for all pads we want to convert.

Afterwards we are cutting out the foam circles. This can be done with the scissors because the foam is very thin. Cut a slit in the foam slice with the CD hole and cut it out.
That way you should have these 3 prepared foam slices for every pad.




3.) Removing the original foam from the pad:
Now take the pad, lift the sensor/trigger plate very carefully and take a look inside.
Be careful with the small trigger wires you see.
Sometimes during the manufacturing they used too much of the yellow glue to fix the trigger sensors at the sensor plate and at the bottom. If there is a yellow glue strip between sensor plate and bottom you can cut it away with the scissors. Now cut a slit into the black foam and afterwards remove the foam very carefully.
Again, take care of the trigger wires.



The original foam is not need anymore. Keep it anyhow.
You can speed up the process by prepairing all pads that way.


4.) Adding the prepared foam:
Lay down the sensor plate to the bottom of the pad. Take the 12” plastic shell and place it on the pad.
The notches of the plastic shell must fit with the knobs on the pad bottom.
Now lift up the sensor plate inside the plastic shell very carefully and place the first prepared foam with CD hole. It is better to do this inside of the plastic shell because the plastic shell works like a shape.
Afterwards take the second prepared foam with CD hole and place it as a second layer.
That way you have a foam sandwich of 2 layers with a height of 10mm / 0.4 Inch.




5.) Adding the foam on top:
Move the sensor plate with the rubber to the center of the pad. Afterwards place the prepared foam on top.



As you can see, the foam is a bit higher than the edge of the plastic shell.
That’s necessary, because after placing the mesh head on top, the foam becomes a bit compressed and in turn it is providing the permanent contact from the mesh head to the sensor plate.




6.) Tension of the mesh head:
At first place the mesh head on top of the pad and press it a bit down. Afterwards place the rim and do the tension very smooth. Than do it criss-cross untill the mesh head has an entire contact with the foam underneath.



Do the final tension reflecting your liking and playstyle with the drum pad mounted on the rack and connected to the module.
If you receive misstriggers on the mesh head playing close to the rim and you are not able to eleminate them via the settings, you can fine tune the tension by using a stronger tension.

For myself I’m prefering a hard tension.
The bolt is nearly plain with the plastic bottom that keeps the nut.
That gives me a very good rebound to play rolls, ghost notes etc.




IV.) Answered questions you might ask

Q: 10mm / 0.4 Inch as space between both triggers seems too less for me. Do they hit eachother ?
A: No, no way. I did the blacksmith-method to the pad and did not receive any rim triggering as I hammered on the drum head. Furthermore I did 2 gigs with the converted pads. Everything was absolutely fine.

Q: Why do you use 2 thin layers of 5mm / 0.2 Inch foam instead of one piece of 10mm / 0.4 Inch ?
A: Saving money. The Adam Hall foam roll was big enough to allow it.
On the other hand I did not find any other foam that comes with that size and condition of being fluffy and stable the same time.

Q: A foam slice of 5mm / 0.2 Inch underneath the mesh head seems too less for me. Do I hit the sensor plate with the rubber on it ? In addition why is there no hole in it ?
A: With a “normal playstyle” you would not hit the sensor plate, only if you play very very hard and weird. But this is not necessary because you get the maximum loudness much earlier. And if you hit the sensor plate with the rubber because you are very ambitious at that moment, it doesn’t matter. For that moment it feels like playing on an original and unconverted pad and you receive a harder rebound. The same time the produced noise is still dampened.
I decided to use this foam without a hole. With a normal playstile I did not recognize any difference.
Using a foam slice with hole and playing very very hard and thereby hiting the sensor plate with rubber, the produced noise was not dampened and sounded like an original and unconverted pad.
Furthermore I’m using a hard tension. I never hit the sensor plate.

Q: Can I use any other foam and do the conversion the same way ?
(I cannot order the Adam Hall foam and/or it will cost me too much)
A: You can give it a try. But please understand that I cannot promise you the same result and I cannot do a remote diagnosis.
The best would be to go to a music store selling foam to cover the front of loud speakers. Check the condition of this foam and compare it with foam you can buy.

Q: Can I take the foam that comes with the pad, cutting it in two slices and afterwards adding some funky foam / EVA foam to it to lift up the whole foam sandwich ?
A: You would not get a plain surface by cutting foam in slices not even using a sharp box cutter.
Keep the original foam and if you decide to sell your drums you can replace the original condition.

Q: Just a funny question. What can I do with the mylar heads after the convertion ?
A: Turn them around and place them onto the converted pads. With that you got the best looking dust cover you’ve ever seen.


V.) Videos

The first video compares the produced noise playing on the converted pad with mesh head.
Some hits are very hard to show you the maximum loudness.



The second video shows you the performance of the converted pad as a snare drum. I used the settings mentioned at the beginning. The selected drum kit is “072 Funky Drmr”.
The sound cable is connected from the DM10 to the 10 year old video camera.
Some hits are very hard to show you what maximum and oversteering you get even using the linear curve.




That’s it.
Thanks and with kindly regards,
Gerdy
« Last Edit: October 11, 2012, 08:54:48 AM by Gerdy »

Offline vtdrummer

Nice description of your mesh conversion Gerdy.  I'm sure many will find it very helpful!
DM10 Studio 2011 w/Surge Cymbals added, BB Mesh head conversion w/rubber muffs at bottom, one 12" A-E pad, Simmons DA200S, sometimes using 2 satellite speakers... Simmons SDMP-1 Multi-pad.
See my DIY 12" Acoustic to E-Drum project post here: http://www.dmdrummer.com/index.php?topic=1227

Offline Hellfire

One word...

Awesome!

I think I will sticky this topic. Thanks for sharing Gerdy.

Offline drumday

One word...

Awesome!

I think I will sticky this topic. Thanks for sharing Gerdy.

Bravo!  We got the HF method & now the Gerdy method for the new 12" pad.

Gerdy, your visits aren't as frequent as others, but your contributions are enormous.  Thank you.
DM10 Studio 2011, BBII mesh conversion w/ resistors left in place, Simmons DA200S, ProMark 7A nylon, Sennheiser HD280 headphones, Gibraltar rack, Camco double pedal.

Fantastic stuff Gerdy - A very good and well thought out post, many thanks for sharing this information.

Right time for me to start thinking about buying the new 12" pad!!

TC.

Bravo! I see no reason that this method would not work for the smaller drums as well. The softer, less dense (fluffier  :| ) foam reminds me of Hellfire's poly-fill method. One of my favorites to date.

Great conversion Gerdy, and thanks for sharing.

I am thinking about trying it so I'm looking into sourcing what I'll need.

[Edit: ignore this, I corrected myself in the next post] Something baffles me at the moment - I must be missing something... The original grey foam is approx 20mm, is this right? That's what it is in my 12" pads. So you remove that and instead you add 3 x 5mm foam which is 15mm. So you are losing 5mm, yet your photo shows you have created extra lift, how can that be?

I think you had the 5mm foam already but if you had the choice (I don't have any foam so I can get exactly what's required), instead of 3 x 5mm foam, would adding 2 x 12 mm foam be likely to work well? One layer beneath the sensor plate and one layer above. This would give 4mm extra lift to make contact with the mesh head. The entire stack can be lifted in this way instead of using funky foam. What do you think?

http://www.musicstore.de/en_EN/IEP/Adam-Hall-Lautsprecher-Frontschaum-200-x-100-cm-12mm/art-PAH0010011-000
« Last Edit: January 29, 2012, 03:52:28 PM by NK_Drummer »

Offline Trondster

How are the 12" pads compared to the 10" pads? Both before and after the conversion? I'm thinking of feel, bounce, responsiveness, hotspotting etc.

I'm considering - if I ever want to upgrade my pro kit with an extra tom - do I just add another 10" tom, or do I go for a 12" for the snare, and use the existing 10" snare as the extra tom...

Now that there is a nice recipe for mesh head converting a 12" pad, adding a 12" is suddenly an interesting option.. :)
DM10 Pro kit with dampened rack, extra crashes, mesh heads, Gibraltar stands, P2002C and a dream cherry snare by Diamond Drums.

I correct my previous mistake, the 12" has 15mm black foam, the 10" has 20mm - although I need to double-check again...so that clears up my confusion. If the 10" does indeed have 20mm that would mean different foam requirements for different pad conversions....does anyone know the default grey foam depth in the 8"? (I only have 1 8" in the DM10x, the kick and I really don't want to open it up right now)

@trondster,  out of the box the 12" pad is way better than 10" for response and playability, also marginally quieter. It still needs the mesh head conversion though because of the mylar heads and there's only a thin layer of foamy rubber between the head and the metal sensor plate. I'm not sure if I just need to play around with the settings to get the 10" playing as good as the 12" but so far I am getting on better with the 12". So going on what I have found so far, if space is not the primary concern, then if I were you I'd get the 12" for snare. It would be worth getting some more opinions on the relative playability of 10" vs 12".
« Last Edit: January 29, 2012, 03:51:31 PM by NK_Drummer »

Offline Trondster

..But to get a pad to convert - does anybody know somewhere you can buy a 12" pad in Europe?
DM10 Pro kit with dampened rack, extra crashes, mesh heads, Gibraltar stands, P2002C and a dream cherry snare by Diamond Drums.

Offline drumday

Re: 12“ Mesh Head Conversion / only with foam / step by step / incl. videos
« Reply #10 on: January 29, 2012, 01:05:51 PM »
...would adding 2 x 12 mm foam be likely to work well? One layer beneath the sensor plate and one layer above.

I don't see where this concept was addressed, but I would think that in principle, the farther down the stack the piezo goes, the less sensitive it becomes.  This is why some desolder their resistors.  Chime in, please, if I'm misunderstanding or applying the theory.  So if true, I'd prefer to try this method with a 2/3 total needed below the plate, then the other 1/3 above it.
DM10 Studio 2011, BBII mesh conversion w/ resistors left in place, Simmons DA200S, ProMark 7A nylon, Sennheiser HD280 headphones, Gibraltar rack, Camco double pedal.

Re: 12“ Mesh Head Conversion / only with foam / step by step / incl. videos
« Reply #11 on: January 29, 2012, 03:39:17 PM »
...would adding 2 x 12 mm foam be likely to work well? One layer beneath the sensor plate and one layer above.

I don't see where this concept was addressed, but I would think that in principle, the farther down the stack the piezo goes, the less sensitive it becomes.  This is why some desolder their resistors.  Chime in, please, if I'm misunderstanding or applying the theory.  So if true, I'd prefer to try this method with a 2/3 total needed below the plate, then the other 1/3 above it.
I think you're right. We need to trade off foam depth for noise reduction versus loss of sensitivity, and from Gerdy's results, 5mm seems to be a good foam thickness. Perhaps there is a certain thickness threshold for complete noise reduction and above that you get no additional improvements, while sensitivity is going to be fine up to a certain thickness of foam beyond which sensitivity begins to deteriorate...if we could find out those two dimensions we would have something to work with for all pads...
So talking about foam placed between sensor plate and mesh head:-
1) How much foam thickness behind the mesh do you need beyond which no more foam will improve noise?
2) From what depth of foam thickness does sensitivity begin to deteriorate significantly?
Do we have a happy zone between those two thicknesses, wouldn't that be nice? This would allow us to select the perfect foam thickness.
« Last Edit: January 29, 2012, 03:54:10 PM by NK_Drummer »

Offline Gerdy

Re: 12“ Mesh Head Conversion / only with foam / step by step / incl. videos
« Reply #12 on: January 29, 2012, 09:56:41 PM »
@NK_Drummer

I can comprehend your intention.
But I think you are neglecting some other important factors.

Hardware:
1.) Pad diameter
2.) Pad height (8” and 10” have the same height, 12” is lower)
3.) Different mesh heads (material, thickness, layers)
4.) Individual likings of the drum head tension

Individual personal DM10 settings:
1.) Sensitivity
2.) Threshold
3.) Curve

Just from my view:
I do not think that we can create a “foam formula”. There are to much individual factors.
And finally how about the playstyle of each drummer ?
That's the next individual factor.


I did the Hellfire conversion to the 8” and 10” pads and used my method for the 12” pads.
All resistors are not removed.
The tension on the 8" and 10" pads are a bit harder than on the 12" pads.
After tweaking all settings I can play on all pads in the same way.
Sensitivity is 25-30.
Curve Linear for the snare and Log1/2 for the toms.

And don’t forget the dynamic settings inside of an instrument:
As I have seen, a lot of e-drummers do not pay attention to these parameters.
A lot are trying to set the dynamic only by using Sensitivity and Curve which is affecting all kits (and afterwards are wondering why another selected kit feels different).

My individual formular of creating a perfect sounding and playable e-drum kit is this:
20% is done with a correct setup and mounting process
20% is done with a mesh head conversion, drum rack damping and drum head tension
30% is done with an overall module setting for all kits
30% is done with tweaking each instrument of a selected drum kit

Some (new) e-drummers think that an e-drum kit is easier to setup and to tweak. Wrong.
You can compare it in most situations with an acoustic kit.
It took me more than 10 years and 3 acoustic drum kits to find my individual liking before starting my career in a huge band in 1990. Don’t ask about the time (and money) to go through different drum heads, resonance skins, sticks, bass drum machines, hihat-stands etc.
And in addition I had to tweak and dampen my drum set in each situation. In the rehearsal room, at the recording studio and on stage (I was always the first band member who was setting up his gear).
Ahhh…positioning the mics…also very nice…you thought you are done and during the sound check you are forced to set them up again.
And now let’s look to an e-drum set. Forget the illusion to receive an “out of the box and ready to play” drum set. You can do so many things wrong. It starts with an incorrect setup and ends with the settings of the drum module.
The secret is: Identify yourself with your drum kit, dive into it, take your time and tweak it.
And after that you have to tweak each selected drum kit to your likings.

As an acoustic and/or e-drummer you decided to
- play one of the biggest instruments
- have one of the most personalized and individualized instruments you can get
- spend a lot of time to your instrument, more than others have to do, to receive a perfect drum kit
« Last Edit: January 30, 2012, 08:59:43 AM by Gerdy »

Re: 12“ Mesh Head Conversion / only with foam / step by step / incl. videos
« Reply #13 on: January 30, 2012, 06:02:30 PM »
@Gerdy. Thanks for providing your insights in such detail. You are right, I am over-simplifying it:- of course I am just a beginner and still optimistic :D.

So to save me learning the hard (and expensive and slow) way, I do appreciate the wisdom being shared on this forum and the fact that you and others make this so accessible to the likes of me.

Anyway, I ordered the 5mm Adam Hall foam to convert my 12" pads...in a 2m x 1m sheet there will be enough to experiment with the other size pads too. I will report back.

About the band you joined in 1990, were they/you well known? :-X

Offline Gerdy

Re: 12“ Mesh Head Conversion / only with foam / step by step / incl. videos
« Reply #14 on: January 31, 2012, 04:53:12 AM »
The band became famous mid of the 90’s in southern Germany. All band members were brilliant musicans and we stood as a compact unit on stage. I had to leave the band in 1999 because of a mission in Kosovo (former Yugoslavia). I’am a soldier since 1987 and last year I came back from my meanwhile 8th mission. Next mission is planned next year which is going to be my third mission in Afghanistan. There is no way of being a drummer in a professional band for the next ten years (until I’am going to retire from active duty).
NK_Drummer, please let’s go back on topic or otherwise we would spoil this thread.
Let us look forward on your plan in doing the mesh conversion. ;)

Offline einarabelc5

Re: 12“ Mesh Head Conversion / only with foam / step by step / incl. videos
« Reply #15 on: February 14, 2012, 08:39:58 PM »
...would adding 2 x 12 mm foam be likely to work well? One layer beneath the sensor plate and one layer above.

I don't see where this concept was addressed, but I would think that in principle, the farther down the stack the piezo goes, the less sensitive it becomes.  This is why some desolder their resistors.  Chime in, please, if I'm misunderstanding or applying the theory.  So if true, I'd prefer to try this method with a 2/3 total needed below the plate, then the other 1/3 above it.
I think you're right. We need to trade off foam depth for noise reduction versus loss of sensitivity, and from Gerdy's results, 5mm seems to be a good foam thickness. Perhaps there is a certain thickness threshold for complete noise reduction and above that you get no additional improvements, while sensitivity is going to be fine up to a certain thickness of foam beyond which sensitivity begins to deteriorate...if we could find out those two dimensions we would have something to work with for all pads...
So talking about foam placed between sensor plate and mesh head:-
1) How much foam thickness behind the mesh do you need beyond which no more foam will improve noise?
2) From what depth of foam thickness does sensitivity begin to deteriorate significantly?
Do we have a happy zone between those two thicknesses, wouldn't that be nice? This would allow us to select the perfect foam thickness.

I just got replacement EVO foam for my pads. So far I've only installed it on the 10" (snare) It is about 1 3/4" inches thick(i'll edit with measurements later since I have a spare).  Here's what I did:

Remove "craft foam" from original Hellfire mod.
Remove "mouse pad like foam" that's glued to metal plate.
Clean the plate
Put New thicker evo foam on top.
Now instead of a white snare I have a blue one since my mesh is HART(single ply)

No sensitivity changes made. Works fine.

Offline einarabelc5

Re: 12“ Mesh Head Conversion / only with foam / step by step / incl. videos
« Reply #16 on: February 14, 2012, 08:45:20 PM »
@NK_Drummer

I can comprehend your intention.
But I think you are neglecting some other important factors.

Hardware:
1.) Pad diameter
2.) Pad height (8” and 10” have the same height, 12” is lower)
3.) Different mesh heads (material, thickness, layers)
4.) Individual likings of the drum head tension

Individual personal DM10 settings:
1.) Sensitivity
2.) Threshold
3.) Curve

Just from my view:
I do not think that we can create a “foam formula”. There are to much individual factors.
And finally how about the playstyle of each drummer ?
That's the next individual factor.


I did the Hellfire conversion to the 8” and 10” pads and used my method for the 12” pads.
All resistors are not removed.
The tension on the 8" and 10" pads are a bit harder than on the 12" pads.
After tweaking all settings I can play on all pads in the same way.
Sensitivity is 25-30.
Curve Linear for the snare and Log1/2 for the toms.

And don’t forget the dynamic settings inside of an instrument:
As I have seen, a lot of e-drummers do not pay attention to these parameters.
A lot are trying to set the dynamic only by using Sensitivity and Curve which is affecting all kits (and afterwards are wondering why another selected kit feels different).

My individual formular of creating a perfect sounding and playable e-drum kit is this:
20% is done with a correct setup and mounting process
20% is done with a mesh head conversion, drum rack damping and drum head tension
30% is done with an overall module setting for all kits
30% is done with tweaking each instrument of a selected drum kit

Some (new) e-drummers think that an e-drum kit is easier to setup and to tweak. Wrong.
You can compare it in most situations with an acoustic kit.
It took me more than 10 years and 3 acoustic drum kits to find my individual liking before starting my career in a huge band in 1990. Don’t ask about the time (and money) to go through different drum heads, resonance skins, sticks, bass drum machines, hihat-stands etc.
And in addition I had to tweak and dampen my drum set in each situation. In the rehearsal room, at the recording studio and on stage (I was always the first band member who was setting up his gear).
Ahhh…positioning the mics…also very nice…you thought you are done and during the sound check you are forced to set them up again.
And now let’s look to an e-drum set. Forget the illusion to receive an “out of the box and ready to play” drum set. You can do so many things wrong. It starts with an incorrect setup and ends with the settings of the drum module.
The secret is: Identify yourself with your drum kit, dive into it, take your time and tweak it.
And after that you have to tweak each selected drum kit to your likings.

As an acoustic and/or e-drummer you decided to
- play one of the biggest instruments
- have one of the most personalized and individualized instruments you can get
- spend a lot of time to your instrument, more than others have to do, to receive a perfect drum kit

Good point at the end. There's no difference. Technology is SUPPOSED to make your life easier. Think again. It's just ANOTHER tool. No magic involved.

Has anybody in the US sourced this "adam hall foam" stuff locally ?  my googling for this product only seems to find vendors located throughtout  Europe.   

I found some places in the US by searching around for "speaker foam" or "acoustic foam" , but these all seem to be sold in US thicknesses (ie 1/4" , 1/2") .   
5mm converted to US is like 0.20" (just under 1/4"). 
I'm not sure if the US product is just rounded for convenience's sake or if it is in fact 0.05" thicker than what is required, and if so, whether this small amt would affect the mod results in any signficant way.

???

K

I would venture to say that it wouldnt hurt it any as long as you have the holes appropriately cut and the plate(s) can resonate.  If it equates to a wee bit more thickness, the head will pull it all together and make it a bit firmer.

Worst case would be you have to adjust your sensitivity levels.
DM8 Pro w/ Roland V-Drum Mesh Heads
DM10 module on standby waiting to be utilized

This seems to be the most promising product that I have found:

http://www.tchweb.com/tchstore/category/acoustic-foam/s0/509---Acoustic-Foam.html
$26.97 for a 4'x6' x 1/4 " sheet.  (+ S+H ~ $10)

When I inquired as to whether they knew if this was comparable to the Adam Hall product, the response I rcvd was "Since we are the same exact type of company in the US, I would suggest you look at this part, which is really the same type foam that we sell to all the US makers of speaker cabinets."

UPDATE
because of a suprisingly nice bonus from work :)  I sold my DM10 Pro and upgraded to a DM10X.  I did a full mesh conversion with Billy Blast 2 heads using HF method on 8 and 10's and this method on the 12's, using the 1/4" TCH foam. 

The 1/4" foam seems to be working well so far, the only difference to me is that the screw threads from the drum head aren't flush with the bottom of the hole.  They are recessed a little bit, which makes sense given the "stack" is a bit higher with 3 pieces of 1/4" foam vs 5mm foam.  Playablity and feel seem A-OK to me     

K

« Last Edit: April 13, 2012, 01:12:44 PM by keno21176 »

Keno, is there enough foam on (1) roll to do all (3) 12in. heads???????

I just started this mod except my 12 inch pads have wood shells an uses 2 layers of 10mm foam underneath the resonating plate interestingly the top layer of he foam has the cd sized hole in it already. Therefore all I have done is added a layer of the 5mm acoustic foam on top.

Will let you know how it plays tomorrow when the mesh heads arrive

Offline Gerdy

Hi vortexuk,

as I have noticed you are using a DM pro kit.
The 12" pads from the pro kits have more space inside and are of the same foam arrangement like the 8" and 10" pads.
You can do the hellfire mesh conversion with your 12" pads.

This mod is for 12" pads from the X kit, they have less space inside.
I mentioned that at the beginning of my post.

Re: 12“ Mesh Head Conversion / only with foam / step by step / incl. videos
« Reply #23 on: September 18, 2012, 07:44:56 PM »
I just want to make it known that I followed the instructions to the letter (I got the speaker foam on ebay so it might not be exactly the same but it was 5mm) and not only do the pads perform flawlessly, but it also completely eliminated mistriggering on two of the 12" rims. For reference  I used 682 black mesh pads
DM10(BlueJay)/DM8/iO, SD3; Shure SE215, Simmons DA50, Alto ZMX862, Focusrite Scarlett; Tama SpeedCobra, VF 7AN, Roc-N-Soc;
DIY: Tennis Ball Drum Riser, Cymbal Felt Beater, Footswitch Cymbal Choker[url]

Offline Giffo

Re: 12“ Mesh Head Conversion / only with foam / step by step / incl. videos
« Reply #24 on: September 19, 2012, 04:14:50 AM »
I just want to make it known that I followed the instructions to the letter (I got the speaker foam on ebay so it might not be exactly the same but it was 5mm) and not only do the pads perform flawlessly, but it also completely eliminated mistriggering on two of the 12" rims. For reference  I used 682 black mesh pads

Good job.
I'm toying with the idea, hmmm.

Mesh heads = http://www.682drums.com/Mesh-heads-for-Alesis----set-II-p-16162.html

Acoustic Foam = http://www.ebay.co.uk/itm/Acoustic-Speaker-Front-Grill-Foam-1000mm-x-500mm-x-5mm-/160811342958?pt=UK_Sound_Vision_Speaker_Parts&hash=item25711a5c6e

Should work out at about GB£12.00 per head then.
Just gotta pluck up the courage to do it I suppose! :-\
Strike Pro & DM10 Studio with mesh head conversion