Author Topic: roland vh-12 hihat  (Read 4271 times)

roland vh-12 hihat
« on: April 28, 2010, 10:22:19 PM »
ok, these roland hats are not on the list of hihat compatibility for the dm10.

didnt realize this till after i bought them. so is there a way around this or do i need to return these for a different set of hats?

thanks!
jason

Re: roland vh-12 hihat
« Reply #1 on: April 29, 2010, 02:13:52 AM »
According to Hellfire's list the vh-11 will work with these settings
Gain: 20 Comments: unable to trigger heel splash

It doesn't say anything about the vh-12 though. From what I hear the pintech cymbals work fairly well. Havent decided on the PC series or visualites yet though. Here is Hellfire's "stuff I tested list" just in case.

Online Hellfire

Re: roland vh-12 hihat
« Reply #2 on: April 29, 2010, 08:58:57 AM »
According to Hellfire's list the vh-11 will work with these settings
Gain: 20 Comments: unable to trigger heel splash

It doesn't say anything about the vh-12 though. From what I hear the pintech cymbals work fairly well. Havent decided on the PC series or visualites yet though. Here is Hellfire's "stuff I tested list" just in case.
Point of clarification. That list is from Alesis not me. I just put it on the site to help people out. I did not make that list. Alesis did.

Re: roland vh-12 hihat
« Reply #3 on: April 29, 2010, 09:30:34 PM »
Whoops, sorry on the miscredit Hellfire :-X

From what I was reading on the VH-12 jj they seem to only work on the the TD12 and TD20, not even the TD9 can use em. So if you can exchange them out I would go that route, but if you're stuck with em there is a very extensive writeup on how to convert them if you dont mind doing a lil DIY work.

http://www.vdrums.com/forum/showthread.php?t=60030