alesisDRUMMER
Welcome,
Guest
. Please
login
or
register
.
March 29, 2024, 08:35:45 AM
Home
Help
Login
Register
About
alesisDRUMMER
»
Laboratory
»
Do-It-Yourself or DIY
»
DM10 Dual Zone Drum Replacement Jack
« previous
next »
Print
Pages: [
1
]
Author
Topic: DM10 Dual Zone Drum Replacement Jack (Read 1579 times)
Deiseldave
Newbie
Posts: 5
Total likes: 0
Total likes: 0
DM10 Dual Zone Drum Replacement Jack
«
on:
June 29, 2017, 12:46:30 AM »
Hello. I messed up one of the solder pads on the 1/4" jack board one of my 12" drums. It pulled away from the board... An idea where I can get a replacement jack? Been searching Google, and not finding anything. Thanks.
Logged
Chaser
Ultimate Member
Posts: 1,456
Total likes: 488
Total likes: 488
Re: DM10 Dual Zone Drum Replacement Jack
«
Reply #1 on:
June 29, 2017, 01:46:32 AM »
The jacks themselves are relatively easy to find..they are 1/4" PCB panel mount ...
Some drums came with the circuit board mounted to the jacks..some came with the resistors soldered to the pins.
When I did the mesh conversion kit I had the jacks with the resistors soldered directly to the pins..(4 pin jackwith one pin bent over.)
if you are trying to find them with a circuit board that may be difficult,you could check with Alesis...I think alot of members removed them and just threw them away.
Check this thread..
http://www.alesisdrummer.com/index.php?topic=2473.0
Logged
Deiseldave
Newbie
Posts: 5
Total likes: 0
Total likes: 0
Re: DM10 Dual Zone Drum Replacement Jack
«
Reply #2 on:
June 29, 2017, 08:28:33 AM »
Awesome. Thanks, Chaser.
Logged
Print
Pages: [
1
]
« previous
next »
alesisDRUMMER
»
Laboratory
»
Do-It-Yourself or DIY
»
DM10 Dual Zone Drum Replacement Jack