DM10 Program change messages

[thecubasekid]

Hi All,

can anyone explain how 'program change' messages are ment to work with the DM10 and external devices? i have program change set in my settings as 'Send' my expectation was that when i turn the jog wheel to change a kit on the module, it would send a program change message over midi to my PC, a least this is how my old Yammy DTX500 worked with Midi Din connection in to my focustrie. (with the DM10 i am using USB midi connection from the module)

all other midi messages (notes and HH pedal CC msg) are working in the way i would expect, i can play BFD and Addivtive Drums no problem using Midi sent over USB from DM10 through Nuendo, but when i move the jog wheel and change kit, no midi is reqistered in my host (i also tested this with Midi OX and got same, nothing recieced)

i am missunderstanding the feature here? is there a way i can ask the DM10 module to send program change msg over midi while sitting at my drums?

i have a playlist set in BFD, and with my midi keyboard, i can cycle through presets on that play list no problem using program change msgs. is same possible from my module iteslf?

Thanks!

[Chaser]

Hi All,

can anyone explain how 'program change' messages are ment to work with the DM10 and external devices? i have program change set in my settings as 'Send' my expectation was that when i turn the jog wheel to change a kit on the module, it would send a program change message over midi to my PC, a least this is how my old Yammy DTX500 worked with Midi Din connection in to my focustrie. (with the DM10 i am using USB midi connection from the module)

all other midi messages (notes and HH pedal CC msg) are working in the way i would expect, i can play BFD and Addivtive Drums no problem using Midi sent over USB from DM10 through Nuendo, but when i move the jog wheel and change kit, no midi is reqistered in my host (i also tested this with Midi OX and got same, nothing recieced)

i am missunderstanding the feature here? is there a way i can ask the DM10 module to send program change msg over midi while sitting at my drums?

i have a playlist set in BFD, and with my midi keyboard, i can cycle through presets on that play list no problem using program change msgs. is same possible from my module iteslf?

Thanks!

Have you set up each Kit you are using ? (In The Module)
The parameters for the Program Change are setup... per Kit.

Program Change setting for..Receiving... UTILITY > MIDI > EXT..Prog Chng ON
Program Change setting for..Sending..... UTILITY > MIDI > OUT..Prog Chng SENT

Then under the Kit Menu..you setup the Individual Kit parameters..per Kit

DM10 User Guide pg 16





MIDI IMPLEMENTATION



PUBLISHED NRPN



EDIT:
Added Images..Links

[thecubasekid]

aah! no i have not...that is very helpful, Thank you!

[thecubasekid]

Working! thanks a lot