A lot to take in!
I?ve found a DM10 pro with Mylar heads at an absolute bargain price that I can add all these heads to make a monster kit.
Everything seems to work ok so far but all I?ve done is position and connect?.now to learn how to use it
One thing I should mention and keep forgetting to point out..
The Final Firmware Version has the option for you to select the trigger settings for (4) Kits.. (2) Mylar Kits or (2) Mesh Kits..
I always post the warning about downgrading the Firmware as that's the 1st thing users attempt to do to go back to the Realhat and you will brick the module.
There were 2 separate Trigger updates..One for Pro-X and one for Realhat.
DM10_triggers_V1.00a.syx (use with Realhat pedal)
DM10_triggers_V1.01b.syx (use with Pro-X hi hat)
Once you have installed the V1.01b update..the module will not allow you to downgrade to V1.00a.
There haven't been many posts (if any at all) about anyone using Mesh/Pro-X(FSR) reverting back to Mylar/Realhat..Re-Initalizing the Mylar kit and if the Realhat pedal operates properly..There are posts about trying to downgrade from the Pro-X back to the Realhat....and failing..
The suggestion I made above to help with the sensitivity problems you may face with a module updated to mesh firmware was inaccurate/incorrect about needing to do the Mesh conversion procedure but keep the Mylar Head in order for the Mesh settings to work.
Just re-initialize and select the proper Mylar Kit.Initializing the Default Trigger Settings..Kit Selection
DM10 Studio Kit, DM10 Studio Kit Mesh,
DM10 X Kit, and DM10 X Kit Mesh Kit
The DM10 Studio(Mylar or Mesh) is/was 8/8/8/8" toms and 10" snare..the DM10X (Mylar or Mesh) is/was 10/10/12/12" toms and 12" snare.
1.Power on your DM10 module.
2.Press the Utility button.
3.In the screen that appears, choose F4 (Sys).
4.On the next screen, choose F2 (Init).
5.Use the Cursor Down button to highlight the Trigger Settings option and then press the F4 (Exec) button.
6.On the next screen, use the Cursor Down button to highlight your drum kit and then press F1 (Exec).
Your DM10 module will return to its Main Screen.