Thanks a lot for the reply and the informations, my kit is the original dm6 , all the pads/triggers are all 1/4" (6.35mm) jacks.
I will look around for a second hand dm6 module or similar.
Antonio
If you plan on using a newer Alesis module use the
KIT COMPARISON CHART..It will allow you to check the zone count
The...Crimson..Crimson II..Command..DM10 MKII Studio..Forge modules are based off the
Medeli DD650.
You can load your own samples and songs.
There are differences are in the firmware
I would avoid the Command (single zone ride) and the Forge (single zone triggers)
The Crimson II has the option to use the Pro_X Hi Hat (same controller as Strike except single zone cymbal)
If you use VST be aware the Crimson II and DM10 MKII Studio have the Hi Hat open/closed tied to one note.
The Nitro..Surge modules are based off the
Medeli DD512-514These modules do not have the option of loading your own samples and songs.
There are differences are in the firmware
Out of these 2 module types I tested (DD650 and DD512-514.) I kept the Crimson and sold off the others.
It has everything including separate notes for the Hi Hat (open/closed).
You won't find many complaints for Crimson,but it is harder to find separately.
If you plan on using just VST check the
eDRUMinan older module but very good value is the original DM10