Author Topic: Drum splitter cables  (Read 284 times)

Drum splitter cables
« on: May 09, 2022, 10:08:42 AM »
Can these cable be used for splitting signal for tom/rim
https://www.amazon.ca/gp/product/B000068O54/ref=ppx_yo_dt_b_asin_title_o01_s00

Offline AlanK

Re: Drum splitter cables
« Reply #1 on: May 09, 2022, 11:03:52 AM »
Yes, any TRS male to TS female in general will do (1/4")
DM10X with Addictive Drums 2, Pro X hi-hat, 4 crashes, foam cone conversion w Roland mesh heads, Laurin Drums snare and kick, Mapex P710W double kick pedal, Mapex 2 legged hi-hat, Behringer 8 channel USB mixer, Tascam 144MK AI, Samson Expedition Escape powered speakers

Re: Drum splitter cables
« Reply #2 on: May 09, 2022, 11:15:14 AM »
Yes, any TRS male to TS female in general will do (1/4")

Does it have to have 100 ohm resistor, as some claim its required for strike module?

Offline AlanK

Re: Drum splitter cables
« Reply #3 on: May 10, 2022, 09:49:53 AM »
I've got the DM10 so I can't tell you reliably for the Strike, but I've never heard of resistors in the splitters and have a variety of brands which all work for either my module or other musical/recording equipment without fail, so I assume that as long as the splitter is TRS to two TS inputs and the wiring is good it should work.. if Chaser chimes in here he'll set the record straight no doubt.
DM10X with Addictive Drums 2, Pro X hi-hat, 4 crashes, foam cone conversion w Roland mesh heads, Laurin Drums snare and kick, Mapex P710W double kick pedal, Mapex 2 legged hi-hat, Behringer 8 channel USB mixer, Tascam 144MK AI, Samson Expedition Escape powered speakers

Offline Hellfire

Re: Drum splitter cables
« Reply #4 on: May 10, 2022, 04:31:11 PM »
Yes, any TRS male to TS female in general will do (1/4")

Does it have to have 100 ohm resistor, as some claim its required for strike module?

Nope. The 100 ohm resistor is for Roland modules only. Alesis Strike does not require the resistor.
For more edrum info, be sure to visit my web site at:
          www.HellfireDrums.com                    
My current set-up:  Alesis DM10 and Trigger I/O with modified & DIY pads

Re: Drum splitter cables
« Reply #5 on: May 11, 2022, 09:10:46 AM »
Perfect. Thank you all for the answers.