Good morning,
I purchased a used Dm10 module? Is there any place to have it repaired ?
Thanks, Bob
I presume the original DM10 Module..there were 3 entirely different DM10 Modules..original DM10...DM10 MKII Studio (Medeli DD650) and the DM10 MKII Pro (Medeli 680).
Short Answer...other than a typical Electronics repair shop..No.
You can check with
Alesis Support and see if there is still an Official Center that supports the original DM10 Module..however considering it's been discontinued for nearly (if not) a decade and often Time/labor (No Service manual) and parts (availability) exceed the value of purchasing a working module.
You didn't list the issue(s)..
1) check and make certain it has the correct power supply..9VAC 1.5amp..
AC/AC..
NOT AC/DC.These Modules have odd behavior when the correct Power Supply is not being used..for example If you get an AC/DC unit, the DM10 will power up but will not function correctly and typically NO SOUND....there are Multiple Posts/Topics in the Forum DATA Base (Search..Upper Left)...
this is probably the #1 cause when experiencing issues with the original DM10.
2) Do A Hard Factory Reset..
There are two ways to reset the DM10:
To fully restore the module to original factory settings, hold the EXIT and STORE buttons while powering on the module.
To reset only the kits, sequences, or trigger settings:
Press UTILITY to enter the main Utility Menu.
Press SYS (F4) to access the Accompaniment Settings.
Press INIT (F2) to access the reinitialization page.
Use CURSOR UP/DOWN to move through the following menu items:
All Kits: All of the module?s kits and their settings will return to factory default
All Sequences: All of the module?s sequences and their settings will return to factory default
All Trigger Settings: All of the module?s trigger settings will return to factory default
Highlight the option you would like to reset, then press EXEC (F4).
A window will appear asking you to confirm your choice. To confirm and reinitialize the selected settings, press YES (F1). To Cancel, press CANCEL (F2 or F2).
