Ooooh I see. There is an issue I am having though, the dm5 cymbals are actually smaller inputs, they are the 3\8 kind like the ones most headphone have
if you are talking about the splitter that i linked to earlier i have the same one and i just go directly from the module to each pad--it's 3 meters long so there is plenty of cable there. you have to split the cable down the center seam--make sure the cable that you buy doesn't have a feature that prevents this but most don't--to get enough cable to go to each pad. if you would prefer to use individual cables you could get a very short Insert "Y" cable that has a stereo male and two mono females. it's usually cheaper to go the most direct route.
