Author Topic: Refinished the cymbals on the DM10  (Read 1806 times)

Refinished the cymbals on the DM10
« on: February 12, 2016, 07:05:00 PM »
For those of you that are interested in seeing refinished cymbals for the DM10. It was pretty easy to do and there is an easy way to mask off the rubber edge (not the outer circle of the cymbal) and plastic on the cymbal. If you have business cards laying around, they fit perfectly in the seem between the rubber and plastic.  I know im not the first person to do this on the forum but, just another person to try it.

Then just mask off or cover the rubber portion of the cymbal with paper and masking tape. Make sure to clean off the plastic part of the cymbal with 70% rubbing alcohol to remove finger prints and dust. DONT USE RUBBING ALCOHOL ON THE RUBBER PART OF THE CYMBAL!!!

I used Rustoleum Bright Gold spray paint.
« Last Edit: February 12, 2016, 08:21:39 PM by Drum key »

Offline AlanK

Re: Refinished the cymbals on the DM10
« Reply #1 on: February 13, 2016, 01:42:32 PM »
Looks so cool. And that tiger seems awfully interested in the drumkit too
DM10X with Addictive Drums 2, Pro X hi-hat, 4 crashes, foam cone conversion w Roland mesh heads, Laurin Drums snare and kick, Mapex P710W double kick pedal, Mapex 2 legged hi-hat, Behringer 8 channel USB mixer, Tascam 144MK AI, Samson Expedition Escape powered speakers