Alesis pro X-Hat with Alesis Trigger I/O?

[mikka]

Hi,

i wanted to use the Alesis X-Hat with the Trigger i/o - i read at the thomann page by a user that it works.

I have the problem...it doesn´ really work.

HH-Channel3
HH-Control 8

Only open Hihat works...

any ideas? Cheers

[Chaser]

Hi,

i wanted to use the Alesis X-Hat with the Trigger i/o - i read at the thomann page by a user that it works.

I have the problem...it doesn´ really work.

HH-Channel3
HH-Control 8

Only open Hihat works...

any ideas? Cheers

If by  you are referring to inputs..(HH-Channel 3..HH control 8 ).. the controller is not 8..the controller input is marked Hi Hat ( no number associated).

"8" is the crash input


For a hi-hat pedal, the X-Talk function is used as a Calibration function.  This allows you to calibrate the
pedal for optimum performance.  If a hi-hat pedal is selected, you will see “CAL” displayed on the screen.  You
can adjust the calibration manually or you can let the Trigger IO adjust it automatically by leaving the pedal in
the  up  position  and  pressing up value and down  value  buttons  simultaneously.This  will  automatically 
calibrate the pedal.

The Trigger iO does not officially support the Pro X Hi Hat/stand/pedal setup so you may have to calibrate manually

[mikka]

thanks a lot! i´l try it later:)

[mmdurrant]

I'm curious about how this worked out.