Author Topic: DM10 1st 2nd toms not triggering  (Read 1162 times)

DM10 1st 2nd toms not triggering
« on: April 12, 2017, 08:19:16 AM »
Hi all,

Ive had a DM10x sice they come out and had no issues whatsoever. Recently I unplugged the cable snake to take the module to a friends. ON reconnected everything the 1st and 2nd Toms are not triggering. If I plug snare into either tom it sounds, If I plugg either tom into snare nothing!! ANy help or reasons why?? Im stumped. Cheers.

Offline Dobly

Re: DM10 1st 2nd toms not triggering
« Reply #1 on: April 12, 2017, 09:22:38 PM »
Hi all,
If I plug snare into either tom it sounds, If I plugg either tom into snare nothing!! ANy help or reasons why?? Im stumped. Cheers.

So, you put the snare 'cable' into tom 1 and tom 2 and both made a snare sound? Right?

But then you Tom 1 cable into the snare drum, then tom 2 cable into the snare drum and you got no sound. ?

If this is the case then there are 3 posibilities.

1. The cables for Tom 1 and Tom 2 are not working. 
2. There is something wrong with the inputs on Tom 1 and Tom 2 on the module
3. For some reason Tom 1 and Tom 2 have been turned down.

On point 3, are all the sliders on the module slid up?

Re: DM10 1st 2nd toms not triggering
« Reply #2 on: April 14, 2017, 12:08:43 PM »
That pretty much it yeah.. Which is madness, all I done like ive done 100s of times is strip her down for a clean and plug everyting back in and hey presto... nada, nothing, dead!  Ive ended up with one cymbal and 3 toms now as Ive changed the cymbals input to 1st tom and same with 2nd floor tom input for 2nd rack tom.  Cheers bud.