« Reply #1 on: March 07, 2011, 08:25:00 AM »
You will need a 1/8" stereo male to 1/4" mono TS adapter and a stereo pair of TS cables. Connect the adapter to the output of the DM6 module. Connect the 1/4" TS cables to the adapter, then connect the other end of the TS cables to the input of the JamDock. Use the headphone jack from the JamDock.
Connection this way will allow the JamDock to control the ipod volume (main volume) and the DM6 volume (input volume).
Make sure you have the switch on the JamDock (on the right side) set correctly - do not choose guitar if you are using drums. It won't hurt anything, but you will get a lot of distortion.
« Last Edit: March 07, 2011, 08:26:44 AM by Jermdog »
Logged
Strike Pro, Dm10, Zildjian Gen 16 hats, xhats and garbage cymbals, Kit Toys chinas, crash and splashes, jam dock, mixer, custom 13" tom, alesis, drum workshop and various hardware.