Author Topic: DM10 Dual Zone Drum Replacement Jack  (Read 180 times)

Offline Deiseldave

DM10 Dual Zone Drum Replacement Jack
« on: June 29, 2017, 12:46:30 AM »
Hello. I messed up one of the solder pads on the 1/4" jack board one of my 12" drums. It pulled away from the board... An idea where I can get a replacement jack? Been searching Google, and not finding anything. Thanks.

Offline Chaser

Re: DM10 Dual Zone Drum Replacement Jack
« Reply #1 on: June 29, 2017, 01:46:32 AM »
The jacks themselves are relatively easy to find..they are 1/4" PCB panel mount ...
Some drums came with the circuit board mounted to the jacks..some came with the resistors soldered to the pins.
When I did the mesh conversion kit I had the jacks with the resistors soldered directly to the pins..(4 pin jackwith one pin bent over.)

if you are trying to find them with a circuit board that may be difficult,you could check with Alesis...I think alot of members removed them and just threw them away.

Check this thread..
http://www.alesisdrummer.com/index.php?topic=2473.0

Offline Deiseldave

Re: DM10 Dual Zone Drum Replacement Jack
« Reply #2 on: June 29, 2017, 08:28:33 AM »
Awesome. Thanks, Chaser.