I have a DM10X ans just changed my heads from mylar to the 682 mesh heads. What a difference. It seems like when you hit a head the sound last too long. Is there a setting that will shorten the sound once you have hot a head? Hope this makes sense. Thanks
When you changed to mesh did you also update the module firmware to the DM10X with mesh heads?
http://alesis.com/products/view2/dm10-x-kit-mesh
. There are two downloads for triggers. Should I do both?
I see Alesis still hasn't fixed the text being cut off..
V1.00a-mesh heads with Realhat pedal only
V1.01b-mesh heads with Pro-X Hi Hat only
check your firmware version. You probably have the original version for Mylar heads.
Update it 1st
DM10 – Firmware Updates [posted 9/22/2014]
• Boot, App, Trigger, and Sound ROM firmware updates that improve overall performance of the DM10 module
• Increases sensitivity, reduces the possibility of crosstalk, and enhances system stability
• Adds default trigger settings for the DM10 X Kit Mesh and the DM10 Studio Kit Mesh drum kits
Then do the trigger update