Author Topic: Strike Pro Updated Trigger Settings File  (Read 3501 times)

Online Hellfire

Strike Pro Updated Trigger Settings File
« on: April 22, 2017, 05:34:40 PM »
Congrats on your new Strike module!

Many new users to the Strike have issues with "ghost triggering" (drums/cymbals being triggered when just sitting and nothing is being played on the kit) and/or the hi-hat being totally un-playable out of the box and not to mention cross talk. The good news is trigger settings are global. Meaning they are set for the whole module and not just one kit.

Attached to this post is a StrikeTriggerSettings.syx file. This file "should" correct many issues that you have with "ghost triggering", "un-playable Hi-Hats" and cross Talk (or Xtalk). At the very least this file will diminish these issues and help you to find better settings.

Before you begin: If you have made any changes to your own trigger setting and do not want to lose them, please first backup your trigger settings to your computer before proceeding.

You must be a member (membership is free) and logged in to see the file.

To load StrikeTriggerSettings.syx SysEx file to the Strike module from your computer, follow these steps:
   1.   With the module off, connect the module's USB port to your computer with a standard USB printer cable.
   2.   Power on your Strike module.
   3.   Press the "TRIGGERS" button.
   4.   Use a MIDI utility to send the appropriate sysex file (.syx) to the module (which will need to be selected as 
the receiving MIDI device). Examples of MIDI utilities that can be used:
                 - MIDI-OX (for PC)

                 - SysEx Librarian (For Mac)
   5.   Once you Play/send your sysex file (.syx) be sure to press the "SAVE" button. Then press "F1" for "Yes" and then press "F1" for "OK".
   6.   Your new trigger setting should now be saved in your Strike module.


This was used as a stop gap until new firmware was available. Please see this topic for new firmware: Alesis Strike Firmware update 1.10 Discussion
« Last Edit: April 27, 2017, 04:04:58 PM by Hellfire »

Re: Strike Pro Updated Trigger Settings File
« Reply #1 on: April 23, 2017, 06:00:56 PM »
Thank you!

Online Hellfire

Re: Strike Pro Updated Trigger Settings File
« Reply #2 on: April 23, 2017, 09:07:51 PM »
Thank you!

Your welcome. I hope it works for you.

Offline Jermdog

Re: Strike Pro Updated Trigger Settings File
« Reply #3 on: April 24, 2017, 08:02:01 PM »
Thanks man - this new kit is giving me hell... time to give it some hell back!
Strike Pro, Dm10, Zildjian Gen 16 hats, xhats and garbage cymbals, Kit Toys chinas, crash and splashes, jam dock, mixer, custom 13" tom, alesis, drum workshop and various hardware.